In some cases you may find it desirable to stop the fermentation process before it comes to a stop on its own. The most common reason for wishing to stop the fermentation process is that you have found the wine already has the exact amount of sweetness that you prefer and you do not want it to progress any further.

By stopping the fermentation at that point, many winemakers believe that they can preserve the amount of sweetness that the wine has already produced. If you want a really sweet wine, such as a dessert wine, this is certainly understandable. The idea behind stopping the fermentation process is that if you allowed the wine to continue fermenting it would become less sweet as time went on. When the wine became completely dry, the fermentation process would eventually stop on its own without any intervention from you.

As a result, there are several different methods that home winemakers tend to use when attempting to stop the fermentation process in order to preserve the sweetness. None of these methods work very well; however. Let us examine each.

One of those methods is using either Campden Tablets or Sodium Bisulfite. It should be noted that fermentation will not completely stop using these methods. You should also be aware that the chance does exist for some live yeast to be left in the wine, providing the opportunity for the fermentation process to begin again. In fact, it is not unknown for the process to begin again even after you have bottled your wine and stored it. Obviously, that would not be a good situation and would result in some really poor wine.

Another common option used by some winemakers is Potassium Sorbate. Generally, Potassium Sorbate is used for the purpose of sweetening wine. When it is used for the purpose it is commonly after the fermentation process has already been completed and you are ready to bottle your wine. The Potassium Sorbate is then added with sugar. The purpose of the Potassium Sorbate in this instance is to prevent the yeast from fermenting sugar that has just been added. When added prior to the end of the fermentation cycle; however, Potassium Sorbate will not kill the yeast; it only makes it sterile. This means that it stops producing but it doesn’t stop the fermentation. In other words, it does not prevent the yeast from fermenting the sugar and turning it into alcohol.

If your goal is to preserve the amount of sweetness that is already in the wine, the best way to do this is to actually go ahead and let the fermentation continue on its own until it is completely finished. After the yeast has had an opportunity to settle over a couple of weeks, you will then be able to siphon the wine off and then add some Potassium Sorbate with some sugar.

Keep in mind that it is really imperative to allow the fermentation process to finish before you add anything like Potassium Sorbate or more sugar. If you are not sure whether the fermentation process has finished, you can check it using a hydrometer. Remember that this is the tool that you use to check the alcohol content of the wine. If the process has completed, there should be a reading of no more than 1.000 on the hydrometer.

Winemaking can be an extremely satisfying activity and hobby with a wonderful end result that also makes for wonderful gifts. If you have already experimented with brewing ales and beers you may already be familiar with many of the steps associated with the process of making wine. Winemaking is generally the next step for many home brewers. If you have already done some brewing at home, you probably already own much of the equipment that is required and are familiar with the patience and cleanliness that are required in the process.

If this is a completely new process to you; however, and you have not previously done any home brewing then it is important to make sure you understand the role of both patience and cleanliness in the process of successful winemaking.

Cleanliness is one of the most important steps of making wine. If your work area and equipment are not clean you will find that you encounter innumerable problems in the process and the end result will not be successful. One of the keys to producing good wine is to make sure that your equipment as well as your work area is kept very clean and sterile.

Before you begin any new batch of wine you will want to make sure that your equipment has been cleaned and sanitized thoroughly. The most common cause of homemade wine becoming contaminated is equipment that has been poorly cleaned. In fact, it has been estimated that as much as 90% of failures in winemaking can be attributed to poor sanitation.

To avoid this problem, make sure that you sanitize all of your equipment that will touch either the juice or the wine. This can be easily done by rinsing all equipment using a solution of MetaBisulfate. Potassium MetaBisulfate is an active ingredient that is used in Campden tablets; a compound that is frequently used for sanitizing brewing equipment.

Place 3 tablespoons of the compound into a 1-liter container of hot water. If the container is kept tightly sealed and stored at room temperature, the cleaning solution should last up to six months. Using the solution, make sure all equipment is rinsed thoroughly. Next, rinse all equipment with cold water.

Make sure you take the time to clean all equipment before you store it as well as before you take it out of storage before each use. This will help you to avoid any contamination problems and assure that your equipment lasts as long as possible.

In addition, patience is quite important as well. One of the most common mistakes of many new winemakers is a lack of patience. They want to rush through the steps and as a result discover that their wine is not all that it could be. Remember that just because wine is ready to bottle that does not necessarily mean that it is ready to drink. While it is common to be anxious to drink your homemade wine, waiting is well worth the effort. At a minimum, it is usually about a month from the time your wine is bottled before it will be ready to sample. Generally; however, you should wait at least six months before your wines will have developed sufficient character and be ready for drinking. For heavy reds, be prepared to wait at least a year for the wine to improve. While waiting may be difficult, you can be assured that it will be rewarded with a bouquet that is absolutely delicious.