How to make inexpensive wines from common grocery store items

Not every one of us can afford to have a glass of good wine on our tables with our meals. However, if it were possible, everybody would love to the accompaniment of this beverage. Wine is a drink that has celebrated from time immemorial. There are records that show it brewing and presence on the favorite list from the time man has learnt to cultivate his food.

This beverage is highly recommended for consumption for men, women and even children. The red grape wine in particular has shown some exceptional aging reversal properties, as well as many medical benefits if taken regularly because it is extremely rich in antioxidants.

For those who cannot buy wine, all is not lost. Anyone can make a reasonably good wine with ingredients of your kitchen shelf. This article will show you how to do this. With a little practice you will be able to brew your own inexpensive wine which in taste can compete with the best.

What you will need for your home-made wine

1. Half a cup of sugar
2. 144 ounces of grape juice (about three cans) – ensure that these are 100 percent grape juice and have no other additives
3. A measurement container where could measure one gallon of liquid
4. Two-three ordinary balloons
5. Water – it is recommended to use distilled water, but you could use your normal tap water to further cut the costs
6. A pin which will be used to make a few holes in the balloon(s)
7. Wine yeast. However if you do not have it, your normal baker’s yeast will do just as well, or the yeast you use to make bread. The baker’s yeast is the least expensive
8. For the beginners, who need a bit more orientation and help, it would be good if you ensure you have with you, a measuring cup, a rubber band or a tight rope, a funnel and bottles.

Roll up your sleeves and get ready to make wine

1. Take the funnel and then pour the juice into the container. Pour all the three cans (total 144 ounces) and then pour twice the amount of water. If you have three cans of juice, pour six cans of water.
2. Now, take this whole mixture and mix it thoroughly. Shake it till the mixture becomes totally homogenous.
3. At this point, add the half cup of sugar. Then, shake this mixture again thoroughly. The sugar should totally be dissolved at the end of the shaking / mixing.
4. Now, take the yeast. Following the instructions, you hydrate the yest and get it ready for use. Once the yeast is ready, add this too to the mixture you have and shake it again.
5. Once this is completed, you now tie the balloon to the mouth of the container. Ensure that the balloon has some holes in it before tying it up to the mouth of the container.
6. There is a special way of tying the balloon to the mouth of the container. It should be tightly done (here you could use the string or rubber band to tie it up) and you should ensure that the top of the balloon is not standing up but is inside the mouth of the container.
7. Place this container in a warm place, where it should not be disturbed for at least half a day (12 hours). At the end of this time, you will hear the popping sound of bubbles. This is proof that the yeast is working well.
8. As the days pass (the process would take some 2-3 weeks), the balloon will get inflated with the gas generated by the fermentation process of the grape juice. As long as the balloon is inflated, the process is on. You will know when the wine is done, when the balloon deflates.
9. Your wine is done! Now you will have to pour it slowly through a strainer into whatever bottles you want to store it into. The bottles should preferably be dark in color.
10. Refrigerate and enjoy your wine which cost you almost nothing – but it is YUMMY!

Keep trying – I’ve had so much fun over the past 15 years just experimenting with different methods and I’ll encourage you to also. First – keep with your recipes and tips step by step and then start creating your own concoctions – it’s a blast! Please bookmark and share this site – THANKS!

PS. Shout out to my typo catching friend Eric Hwang, the renowned wine aficionado and fellow foodie with an awesome blog, I highly recommend checking him out at Bricks of Wine.

One of the great advantages of making your own wine is that you are able to take control of as much of the process as you want. If you want to grow and harvest your own grapes or any other kind of fruit and produce wine you can control every aspect of the process. If, on the other hand, you choose to purchase grape concentrate, you can begin making your wine from that point on. Making wine is largely about making a number of different decisions and taking various factors into consideration. Each factor and each decision will have an impact on your final wine.

One of the first choices you will need to make if you elect to make grape wine and use fruit in order to do it instead of concentrate is whether you want to de-stem the grapes or use the entire cluster. When making this decision it is important to keep in mind that it really does make a difference. If you decide to use the whole cluster then you will find that your wine has a certain flavor and even nuance that is not present if you de-stem the grapes first. This flavor may or may not be appealing to you. Some people describe it as somewhat ‘green.’ If you like that sort of flavor, then using a whole cluster is an excellent choice. A number of very good, award winning wines are produced using the entire cluster. If; however, you do not think you would like that flavor, then it is best to go ahead and de-stem the grapes before you use them for your wine.

Another choice you will have to make is how you want to ferment the must. Yes, there are choices to make here as well. You have two basic choices. You can either ferment in a barrel or a tank. Most winemakers prefer to ferment using a tank. This gives you greater control over the process because the sleeves on the tank give you the option to either heat or cool the must. For example, in the beginning of the fermentation process you may wish to ensure the tanks are cool in order to extract the color from the grape skins. This can also help to stabilize the wine. Of course, you can also choose to ferment your wine in a barrel. This is a popular method when producing white wines because it tends to give them some character that might not be possible from tank fermentation. In the end, it is really up to you and your personal choice, but you will need to make this decision before you produce your first batch of wine.

You will also need to give some thought to the types of yeast that you wish to use. Most beginning winemakers are not aware of the fact that grapes picked straight from the vineyard actually have yeast on them. These are naturally occurring yeasts. As a result, you may choose not to add any additional yeast to the fermentation mix. In this case, you can allow the natural or native yeasts to work on their own. The one downside to this problem is that you may run into a problem known as a stuck fermentation. This is when the yeast reaches a certain point and then it just simply stops. Generally, yeasts that are created in the lab will be more stable. Of course, there is a downside to this as well. Many winemakers feel that lab created yeasts are lacking in flavor when compared to natural yeasts.

If you do choose to use natural yeasts, you will need to be prepared to handle a stuck fermentation in the event that it does occur. Adding a yeast nutrient or energizer can often help to combat this problem by providing the natural yeasts the ‘kick’ they need to finish the fermentation process.

Finally, you will need to give some thought to whether you wish to filter or not filter your wine. There is no set rule regarding this matter. You may find that a wine that has been unfiltered will have a great amount of richness; however, do be aware that there are bacterial issues which may arise if you choose not to filter your wine. In addition, wines that have not been filtered tend to have a cloudier appearance than those that have been filtered.