Why do we use certain types of bottles for different wines?

Wine is a very sensitive beverage which gets easily affected by temperature, lights, vibrations, and oxygen among others. Ordinarily speaking, one can use any type of bottle to bottle his/her wine as long as it can be sealed well (some inset a thin layer of nitrogen before sealing it to prevent any chance of oxygen reaching the wine and oxidizing it) and at the same time protect the wine from direct sunlight.

Easy identification of wine type and place of manufacture

All wine bottles are made of glass. Wines, such as Champagne are fermented in the same bottle they are sold in, while most other types are bottled after the fermentations process has totally stopped. Most of the times the wine is bottled in a certain type of bottle for two main reasons – (i) to identify the area from where it comes (manufacturers, vineyard, country, etc), (ii) type of wine.

In the early days wine was stored in wooden kegs. After a while it became fashionable to have wine in large amphorae. Then, with the advent of the popularity of wine and its transport throughout the world, it became commonly stored in glass bottles. These bottles are usually thick, dimpled at the bottom and dark in color. Thick because it should break during travel/ transport; dimpled at the bottom so it can have better stability and easier for stacking while transporting; lastly dark in color to prevent the access of direct sunlight which can destroy the wine within the glass.

Today, the wine bottles are normally of 750 ml and the shape of the bottles in which they are stored usually denote the type of wine and many times the place from where it is produced. This article will attempt to describe a few of the most popular wine bottles below:

1. Bordeaux – this bottle is usually tall with a small neck, light green in color. You will find this type of wine bottle in Italy, Spain, and in parts of the Northern Europe for bottling Bordeaux wines.
2. Burgundy – this type of bottle has slopping shoulders making it elegant and longish. The bottle is green too and also has a large dimple at the bottom. This bottle is mostly used for Chardonnay and Pinot Noir.
3. Rhone – this bottle is much thinner than the burgundy one, but similar in shape otherwise.
4. Champagne – this bottle has very gentle sloping shoulders, is taller than any other bottle, thicker and has a deep dimple at the bottom. This particular shape is to protect the wine within, which ferments after being put in the bottle, and also prevents the bottle from breakage.
5. Rhine – this bottle usually comes in brown color, though they have green bottles too.

There is actually no real rules. The types of bottles have been adopted as a tradition rather than any other reason. There are places where the bottles of wine have been thus for hundreds of years. The main concern for wine bottles, remain to protect the wine. Hence, most of the bottles are thick, dark and longish. All these three attributes help in keeping the wine as healthy as can be till it is drank.

If this is the first time you have ever decided to become involved in winemaking, then you should know that winemaking isn’t an art that started some years ago, the art of winemaking has been around for millennia. History has it that the making of wine started in the area formerly known as Mesopotamia which is in present day Iran. Currently the largest and the best winemakers are in France and Italy. It was the Greeks who brought the art of winemaking as well as the recipes for some of the best wine to Italy. These Greeks stayed in Italy to make their wines because the grapes in Italy were much better than the quality of grapes that the Greeks were formerly used to. As time progressed the Romans took over the winemaking process from the Greeks and started making wine that tasted better than ever before.

As time passed, Romans started consuming much more wine than before. Everyone from slaves to noblemen started drinking. As long as there was food to be had, there was also wine to be drunk. However, because the content of alcohol in the wine was quite high, it had to be diluted with water in order to prevent the people from being drunk all the time. In those periods, the popular wine which everybody drank was of the white wine variety.

Wine tastes were experimented with to a great extent; different additions would be made to the wine in order to create different flavors. You had people mixing honey with their wine in order to create what was called mulsum. At other times people added, herb, spices and a number of additives to create different kinds of wine. One idea which wasn’t very smart was the addition of salt to the wine; it created a bitter wine which no one even liked. Some went as far as adding chalk to their wine, thinking that it would help reduce acid levels.

As time progressed, great efforts were made to improve the different methods involved in the winemaking process. Vines were no longer simply allowed to trail the ground and trellises were built for these vines to grow upwards. What this also achieved is that fewer grapes got wasted by getting rotten or mashed up on the wet ground. The Romans also studied about which grapes grew better in what territories and all this helped create a much better yield.

As things improved, the Romans learnt what vintage wines were all about. Wines that were left longer tended to taste a whole lot better. They started making wines that were from a decade old to two to three decades old. These wines were widely sought after. A number of other advances were made in the field of winemaking and they were the ones who introduced storing of wine in barrels and the putting of wine in glass bottles which were tightly corked. Certain people also believe that they were the first to make use of corks in their efforts.

However in the 1800s and 1900s, the quality of Italian wine reduced and a number of occurrences hampered the growth of the industry. It was until the Italian government stepped in and changed the whole face of the wine industry that things turned around for the better.

When it comes to fine wine, the regions of Italy might come to mind, with their lush, rolling hills where the finest grapes are still hand-picked. Indeed, Italy is home to some of the best wines in the world.

With a population of about 58 million, the country consists of 20 regions subdivided into 103 provinces, each boasting distinctive foods and wines.

During ancient times, the Phoenicians introduced the Mediterranean societies to the “nectar of grapes.” The tribes of Italy began to thrive as wine growers and makers, and wine became one of the most valuable commodities to trade throughout Italy and Europe. Italy was called “Oenotria,” the “Land of Wine,” because of the Mediterranean sunshine and mountain air currents that enhanced the growth of vines.

Italy’s glowing reputation for wine today is due to the fact that it offers the greatest variety of types, ranging through nearly every color, flavor and style.

Italian wines derive from native vines, but also from a complete range of international varieties.

Sangiovese is Italy’s most planted red grape variety, particularly common in central Italy. Trebbiano is the most common name for the Ugni Blanc white grape variety, planted so much that it likely produces more wine than any other grape variety in the world.

Understanding Italian wine may seem to be a complex art, but if you’re up for a challenge, you can test your Italian wine IQ with a short quiz provided by ItalianMade.com.

1. Spumante in Italian wine nomenclature indicates which of the following types of wine?

A) sweet wine; B) dry sparkling wine; C) sweet sparkling wine; D) a wine from Asti; E) sparkling.

2. Nebbiolo is a wine that comes from the Italian word nebbia, which means:

A) cloudy; B) fog; C) diabolical; D) nebula.

3. True or False? The Dolcetto grape variety produces a sweet dessert wine.

One of the decisions you will need to make before you start your next batch of wine is whether you are going to use fruit or concentrates. Concentrates are often preferred by many beginners because they provide a rather easy way to produce very good wines quite consistently. This can be important if you are concerned about starting your first batch of wine and whether or not you will get good results.

You will notice when you purchase concentrates that easy to follow directions and recipes are contained right on the package. This means that even if this is your first batch, you will be able to follow the directions very easily and be assured that the final result will produce good wine.

Another advantage of using concentrates is that in most cases they will also include the other ingredients that you will need for your wine. These ingredients are typically already pre-measured and ready for you to use right away. This avoids the need to go out and purchase any other items as well as worrying over weather you have the measurements rights. If you are a novice winemaker, this can be a great advantage. Due to the fact that all of the guesswork has been taken out of the equation, a lot of the mistakes that first time winemakers tend to make are eliminated.

Many winemakers also prefer using concentrates because they offer far more variety that most winemakers would be able to achieve on their own if they were relying on either growing their own grapes or purchasing them. With concentrates you can purchase grape concentrates that hail from all over the world including such countries as France, Spain, Germany, Italy and Australia as well as many more. These options give you the opportunity to create an extensive variety of wines. In addition, you have the security of knowing that you can purchase concentrates and make wine at any time of the year; even during times when grapes are not normally in season.

The process of getting started using concentrates to make wine is quite easy. The first step is to simply pour the concentrate into whatever container you are using for fermentation and then add the appropriate amount of water. Next, add the yeast and any other ingredients that may be included and called for in the directions that accompanied the concentrate. In most cases, you will need to add about six gallons of water to the concentrate; however, this could vary from one specific concentrate to another so always be sure to refer to the directions carefully.

Next, you will need to siphon the wine from the sediment. This will usually need to occur from time to time; however, the directions will instruct you as to when this should be done. After this process is complete, the wine is ready to be bottled. From start to finish, the entire process usually takes from around 30 days to 45 days. The exact amount of time that may be required usually depends on the exact concentrate you are using.

You do not need a large amount of space to make wine from concentrates; another great advantage for many home winemakers. As long as you have a small space to dedicate to your winemaking it can be quite easy to get started making your own wine using concentrates.

While many people who make their own wine prefer to make wine that is suitable for everyday drinking with meals, there may be times when we you wish to make something more special that would be suitable for special occasions and parties. The obvious choice is sparkling wines. If you have considered making sparkling wines but have been intimidated by the thought because it seemed too complicated, rest assured that it is not nearly as complicated as it might at first seem.

The term sparkling wine refers to wine that has been carbonated. Many people think of sparkling wine as champagne; however, the word champagne is used to refer to sparkling wine that is produced in the Champagne region of France. In Spain, this version of sparkling wine is known as Cava and in Italy it is known as Prosecco.

Regardless of the different names that are used to refer to sparkling wine, the same age-old process can be used to make sparkling wine at home. The basic process calls for beginning with white wine and adding sugar and yeast to the mixture. The wine is then corked so that carbon dioxide will begin to build up. Since the bottle is corked, the bubbles will then become forced back down into the wine.

The process really is quite simple and there is no reason why you cannot begin producing your own version of sparkling wine at home with a few bottles, some sugar, a lemon and some yeast along with your own white wine. Remember that your bottles will need to be sanitized first. While the bacteria that may grow in bottles that have not been sanitized will not necessarily hurt you, it will definitely affect the taste of your wine and could ruin the entire batch.

The first step in the process is to make your white wine somewhat more acidic. The acidity of the wine will give it a texture that is more flavorful and overall crisper. To do this, add the juice of one lemon per twenty-five ounces of white wine.

The next step is to add in the yeast and the sugar. Both of these items are necessary in order for the carbonation to occur. You must make sure that your measurements are exact; however, when you add the sugar into the wine. If you use too much sugar the result will be too much carbonation. This can actually cause the bottles to explode so you want to make sure you use only one teaspoon of sugar per twenty-five ounces of wine.

After you have added the sugar into the wine, you will then need to add in the yeast. You will only need to add ¼ teaspoon yeast into the wine and sugar mixture. Make sure that you sprinkle the yeast carefully into the wine; do not just dump it into the wine. Now, using a large spoon, stir the mixture to be sure the sugar and yeast become well combined. You may even note that the carbonation process has already begun to occur.

Now, it is time to bottle the mixture. To achieve successful results, the mixture must be properly bottled. The biggest mistake in making sparkling wines is to pour the mixture into a bottle and stick in a cork. Many home brewers prefer to use what is known as swing cap bottles that contain a metal rod attached to the cork. Once the cork has been inserted into the bottle, the rod can be locked into place. This works to pressurize the contents inside the bottle. You can purchase these types of bottles at most home brew stores as well as online.

When you pour the wine, be sure to leave about two inches of space in the neck of the bottle. This will allow plenty of room for the pressure to build as the carbonation process occurs. If you do not leave enough space, the pressure will have nowhere to go and you could end up with exploding bottles. Once the bottles have been filled, they should be placed in a location that is cool and dry. Generally, they should remain there for between one and two weeks. When you are ready to drink the wine, do make sure that you chill it first.