As you go along with the winemaking process there may come a time when you have a batch of fruit that you think would make a great batch of wine. If you do not have a recipe available you may be tempted to begin throwing some things together and creating your own wine recipe. If you have been making some wine for some time, this is not normally a problem as long as you may sure you include important additions such as sugar and yeast. There are a few important guidelines to keep in mind; however, in order to make sure that everything turns out well.

First, you will need to take into consideration how much produce must be used. If you have only made grape wine in the past you may be tempted to believe that you will be able to use the same amount of any other kind of produce that you use when making grape wine. This is not the case. The main reason why you may not be able to use the same amount of certain types of produce as grapes is the fact that some types of produce are stronger than others.

The goal is to make sure that you achieve balance in your wine. If you are using a produce that is very strong and/or contains a high amount of acid then you will need to make sure that you balance that with some water for dilution purposes. Generally, the stronger the fruit; the less of it you will need. If you used the same amount of elderberries to make a batch of wine as you use to make grape wine, you will likely end up with a batch of wine that is practically undrinkable.

In order to make up an average five gallon batch of wine; however, you will need to add enough water to constitute five full gallons. If you are using wine grapes, you typically do not need to add any water at all to make up your full five gallons. On the other hand, if you are using something like ginger root, which is a much stronger flavor, then you will need to use a good bit of water because you will typically be using less of the actual produce.

You will also need to decide how much, if any, sugar you need to add to your developing recipe. With a lot of produce, you may not actually need to add any sugar because the produce may have enough of its own to support the fermentation process. If you are not sure whether the produce you are using needs to have any sugar added, use a hydrometer to test the juice. This is a very simple and easy to use device that contains a scale referred to as the Potential Alcohol. This scale measures the potential amount of alcohol that can be produced from the juice in terms of percentages from zero to twenty. This will give you a good idea of how much alcohol can be produced from the sugar level that is already present in the must.

For example, if you get a reading of 4 on the hydrometer then you know you have enough sugar to produce 4% alcohol content in your wine. This is not enough alcohol for most people; so you would need to add some sugar. If you wanted to increase that level to around 12% then you will need to begin adding sugar gradually and testing at intervals until you test it and the hydrometer attains a reading of 12. In most cases, one pound of sugar will raise the alcohol level by approximately 1%. Do keep in mind that it is usually not a good idea to try to produce a wine that with an alcohol content of more than 13%; however, because higher alcohol contents could interfere with the stability and balance of the wine.

Most people commonly associate wines with grapes; however, it is entirely possible to make wines from fruits other than grapes. The production of wine using fruits other than grapes has become quite commonplace as the hobby of home winemaking has become more pronounced in just the last few years.

The process of making wines from various types of fruit is no more complicated than making wine from grapes. The only difference between making wine using grapes and other fruits is the fact that you may need to make some adjustments when using other fruits including sugar content and acid levels. This will mean a couple of extra steps that may not usually be necessary when making grape wine; however, winemakers who have made the decision to use different fruits report that the extra effort is well worth it as you can often produce a stellar wine.

Any number of different fruits may be used for making wine including peaches, watermelons, plums, strawberries, blackberries, boysenberries, gooseberries, pears, grapefruits, persimmons, pineapples and much more.

The first step in making wine using other types of fruit is the same as making wine using grapes. You will need to evaluate the fruit. Keep in mind that the resulting wine cannot be any better than the fruit that was used to produce it. This means that you will need to pay careful attention to the quality of the fruit that you use to make your wine.

Avoid fruit that contain excessive bruises and molds. Try to use only fruit that is completely ripe. Fruit that is not fully ripe tend to produce wine that is somewhat lacking in character. Make sure that you rinse off the fruit before the crushing.

In some cases, you may need to dilute the fruit with water in order to get a good wine. This is because certain types of fruit are too strong on their own without dilution. Other fruits have a level of acid that is too high without dilution and will result in a wine that is sharp tasting. Blueberry and gooseberries are both examples of fruit that require some dilution because of their natural acid levels. Take note that this is not the case with all fruits. Apples, for example, do not require any dilution. You may use pure apple juice with no worries.

The exact amount of fruit that you use to make your wine is dependent on a few factors. Really, there is not a single right formula when it comes to fruit amounts. If you want a dessert wine then you may wish to use more fruit in order to create a heavier, sweeter wine. On the other hand, if you want a wine that is lighter and crisper then you may wish to use less fruit.

In order to monitor and adjust the sugar levels as necessary when using fruits for your winemaking, it is necessary to use a hydrometer. The hydrometer will help you to easily determine the amount of sugar that is present in the juice and how much alcohol will be produce from the level of sugar that is present. This will aide you in understanding whether more sugar needs to be added to produce a higher alcohol content. A hydrometer is a tube of glass with a floating weight on one end. You will be able to gauge the sugar level by looking at how low or high the hydrometer floats once placed in the juice. Generally, there will be a meter on the hydrometer that indicates the alcohol potential.

You will also need to test and adjust the acidity as necessary when using fruits. This is imperative because acid levels can vary greatly among different types of fruits. There are two ways in which acid can be checked. One way is to use pH testing strips or litmus papers. This is generally a very fast and cheap way to check acid levels; however, it is not the most accurate way to check acid levels. The most accurate way to check acid levels is to use a process known as titration. A titration kit can be used to measure the acid level and how it will actually taste. If it is necessary to adjust the level of acid, you can do so using three different fruit acids. They are malic, citric and tartaric and they can be purchased either separately or in a blend known as Acid Blend. You can find these items in a home brewing store.