While many people who make their own wine prefer to make wine that is suitable for everyday drinking with meals, there may be times when we you wish to make something more special that would be suitable for special occasions and parties. The obvious choice is sparkling wines. If you have considered making sparkling wines but have been intimidated by the thought because it seemed too complicated, rest assured that it is not nearly as complicated as it might at first seem.

The term sparkling wine refers to wine that has been carbonated. Many people think of sparkling wine as champagne; however, the word champagne is used to refer to sparkling wine that is produced in the Champagne region of France. In Spain, this version of sparkling wine is known as Cava and in Italy it is known as Prosecco.

Regardless of the different names that are used to refer to sparkling wine, the same age-old process can be used to make sparkling wine at home. The basic process calls for beginning with white wine and adding sugar and yeast to the mixture. The wine is then corked so that carbon dioxide will begin to build up. Since the bottle is corked, the bubbles will then become forced back down into the wine.

The process really is quite simple and there is no reason why you cannot begin producing your own version of sparkling wine at home with a few bottles, some sugar, a lemon and some yeast along with your own white wine. Remember that your bottles will need to be sanitized first. While the bacteria that may grow in bottles that have not been sanitized will not necessarily hurt you, it will definitely affect the taste of your wine and could ruin the entire batch.

The first step in the process is to make your white wine somewhat more acidic. The acidity of the wine will give it a texture that is more flavorful and overall crisper. To do this, add the juice of one lemon per twenty-five ounces of white wine.

The next step is to add in the yeast and the sugar. Both of these items are necessary in order for the carbonation to occur. You must make sure that your measurements are exact; however, when you add the sugar into the wine. If you use too much sugar the result will be too much carbonation. This can actually cause the bottles to explode so you want to make sure you use only one teaspoon of sugar per twenty-five ounces of wine.

After you have added the sugar into the wine, you will then need to add in the yeast. You will only need to add ¼ teaspoon yeast into the wine and sugar mixture. Make sure that you sprinkle the yeast carefully into the wine; do not just dump it into the wine. Now, using a large spoon, stir the mixture to be sure the sugar and yeast become well combined. You may even note that the carbonation process has already begun to occur.

Now, it is time to bottle the mixture. To achieve successful results, the mixture must be properly bottled. The biggest mistake in making sparkling wines is to pour the mixture into a bottle and stick in a cork. Many home brewers prefer to use what is known as swing cap bottles that contain a metal rod attached to the cork. Once the cork has been inserted into the bottle, the rod can be locked into place. This works to pressurize the contents inside the bottle. You can purchase these types of bottles at most home brew stores as well as online.

When you pour the wine, be sure to leave about two inches of space in the neck of the bottle. This will allow plenty of room for the pressure to build as the carbonation process occurs. If you do not leave enough space, the pressure will have nowhere to go and you could end up with exploding bottles. Once the bottles have been filled, they should be placed in a location that is cool and dry. Generally, they should remain there for between one and two weeks. When you are ready to drink the wine, do make sure that you chill it first.

Whether you are a beginning winemaker or you have been making wine for some time and have experienced some problems, it is important to understand the most common mistakes made in winemaking so you can learn how to avoid them.

By far, the most common problem in most winemaking failures can be attributed to equipment that is inadequate. Many people make the mistake of using common household items for their winemaking because they seem to be familiar to the carboys, spoons and air locks that are required for the process. It is important to note; however, that specific winemaking equipment is constructed of special materials. Using products made from other materials can have an impact on your finished wine.

In general, it is a mistake to attempt to reuse products that have previously held other items, especially foods. While you may believe that the container is clean, too frequently food odors will have become immersed into the plastic and as a result your wine may become tainted. In addition, it is not a good idea to use even brand new plastic pails due to the fact that the UV protectants that are used in the plastic could leak into the wine. It is far better to go ahead and invest the money necessary to purchase proper winemaking equipment so that you can be certain of the success of your wine.

Failing to follow instructions is another common mistake. The process for making wine may seem to some beginning winemakers to be complicated. As a result, there usually exists a strong urge to simplify the process. This is generally a mistake. If you are an experienced cook, you probably understand the necessity to follow the directions of a recipe. Veering from the recipe usually results in disaster. The same is true in winemaking.

The quality of your water can also impact the quality of your wine. Hard water or water that has a high mineral content can result in wine that has flavors that are somewhat off or even have somewhat of a haze. It is also important to know that water from a salt-exchange water softener should not be used for winemaking. To be certain of the best quality wine, it is usually best to use bottled water for your winemaking. The difference in the results will certainly be appreciable.

Proper yeast handling is also essential. Have you ever made homemade bread? Yeast must be moistened at the proper temperature in order to become activated. If the temperature is too cold, the yeast will fail to activate. If it is too hot, it will kill the yeast. This is because yeast is a living organism and it must be handled properly for success. As a result it is imperative to make sure that you maintain proper temperature control during the fermentation process. Ideally, it is best to try to maintain a temperature between 65 and 75 degrees Fahrenheit. Be certain the temperature remains consistent. If the temperature in your fermentation area is too cool, the formation process will take too long, which can lead to excess fizz in your wine.

Another common mistake is eliminating the sulfite in the wine. The most common reason for this is sulfite allergies. It is true that some people are allergic to sulfites; however, it is important to point out that even if you eliminate the sulfite from the wine the wine will still not be completely sulfite free due to the fact that the yeast always creates additional sulfites anyway. The purpose of the sulfites is to prevent spoiling and oxidation. In less than a month the wine will begin to taste somewhat off and in less than three months it will be rendered practically undrinkable.

Finally, make sure that you give your wine the proper amount of patience and time that it requires. Successful winemaking truly is an art form. In order to appreciate the results of your labor it really is best to wait the amount of time necessary for the wine to improve before you attempt to drink it. In far too many cases, beginner winemakers have believed they had a bad batch of wine when the problem was that they were trying to drink it too soon. Be patient and wait and you will appreciate the effort.