This list includes 6 Homemade Wine Tips You Should Remember…

The following areas are important for your homemade wine making. By following the following areas in detail you will make sure to get your recipe performing like it should.

Marking the volume on your Primary Fermentor:

Fill your 23 litre glass or plastic secondary carboy (11.5 litre if using Selection Special wine varieties) with water. Empty this volume into your Primary Fermentor and mark off the water level.

Temperature Factor:

It is important to keep the fermentation temperature constant (70 – 75°F). Yeast cells are sensitive to temperature.

Sanitizing Your Equipment:

Make sure all utensils and equipment are clean before use. Use a chlorine cleaning agent to sanitize your equipment. We suggest preparing a soaking tub solution made from your sanitizing agent. Instruments such as your wine thief, hydrometer, mixing utensils, and thermometer are constantly used – keep these soaking in solution until you need them and remember to rinse them thoroughly before use.

Water Quality:

Be sure to use good quality drinking water.

Racking Tips:

Racking your wine or beer (from primary fermentor to secondary carboy, or into a bottle) involves the risk of incorporating air into your wine or beer. To minimize the risk of “oxidation”:

1. • Avoid splashing of wine when racking. Always keep the end of the siphoning hose below the surface of the liquid.
   • Always make sure that your airlock and bung are securely attached and level of water in airlock is properly maintained.

Cork Quality:

When bottling wine, be sure to use quality corks only. Higher quality corks give better protection against oxidation. Longer corks ( min. 1 3/4”) and those with little or no large fissures are preferable. Natural corks are generally better for long term aging. Check with your retailer for more details on the different styles of cork available.

Building a wine cellar can create the ideal environment to store your wines. Temperature is always a major consideration in wine storage and the ideal wine storage temperature is between 55ºF and 58ºF (13ºC–15ºC), although any temperature between 40º–65ºF (5º–18ºC) will suffice as long as it doesn’t fluctuate too much. Ideally, the humidity should be around 70%. If you can’t achieve these temperatures in your passive wine cellar then you may require a wine cellar cooling unit.

A standard home refrigerator makes a poor wine cooling solution for several reasons. It is designed specifically to store and look after food products, not to store wines. An atmosphere that works well for meat and vegetables is far too cold and dry for your expensive wine. The preferred temperature for home refrigeration is somewhere between 35ºF and 38ºF (1.7 to 3.3ºC)

Home – or even commercial – refrigeration equipment is built to cool food quickly to prevent it spoiling. This is achieved by blasting cold air until the desired temperature is reached. Then a cycle kicks in whereby once the set temperature is reached, the refrigerator shuts off. When the temperature rises to a pre-determined point, cold air is again blasted. This continuous fluctuating temperature cycle isn’t good for your wines.

Standard refrigeration equipment is designed not only to cool but also to remove moisture. Wine gives off neither heat nor moisture so you end up with an environment that’s way too dry for wine. This will cause wine corks to shrink, which will allow air to get in. Once the air is in contact with your wine the irreversible process of oxidation begins and your wine is ruined!

Vibration can also be an issue with a home refrigerator. Wine requires a calm vibration-free environment in which to develop so any vibration will eventually destroy a fine wine.

Similarly, home air conditioning provides a poor environment for aging your wines, as it removes the humidity from the air which can lead to corks drying out. Additionally, if air conditioning is only turned on at certain times during the day then the wine will become subject to wide temperature fluctuations, which will inevitably cause irreparable damage to your wine.

To properly cool and humidify a cellar you will need a cooling system designed specifically for cooling a wine cellar.

Wine cellar cooling units can be set at any temperature within the optimum range for successfully aging wines and they cool the air slowly and gently. They are designed to maintain humidity rather than dehydrating the cellar although sometimes additional humidification may be required in extremely dry climates. This type of wine cellar cooling unit is usually installed approximately 18 inches from the top of the room in order to achieve maximum cooling. The unit will also require an unobstructed airflow and adequate ventilation to dissipate the heat generated by the unit.

It is also possible to install a split air system into a wine cellar although these units can be very expensive with prices running into many thousands of dollars.

A split air system is installed outside the wine cellar and the supply and return air is ducted to and from the wine cellar. This wine cellar refrigeration system works like a central air-conditioning system and is similarly quiet. This system would usually include electronic controls and a digital display. There are many options available with split system cooling including humidifiers, dehumidifiers and alarm units. With the addition of the options, a split air system will provide you with total control of your wine cellar refrigeration, albeit at a large cost.

If you find that your wine cellar requires a cooling unit it is worthwhile shopping around and comparing brands. There are few bargains, however, you should be able to save money with a little research.

If you want to create your own wine cellars, take note of the following considerations.

Wine connoisseurs often spend a lot of money on wines, and they naturally want to protect their investment by purchasing home wine cellars.

Some companies offer factory prices, free cad design services, cooling equipment and refrigeration doors. They can turn any room, even a large closet, into a wine cellar. If you are on the look out for wine cellars, choose one that has superior design, with complete project management and high quality installation by experienced craftsmen.

The wine cellars should be made of the finest and clear redwood available. A red wood is ideal, since this rare type of wood made from the heart of the red wood tree can resist rot and mildew.

A good inventory control system is of primary importance, but the least considered element when constructing your own wine cellar. Wine cellaring is considered the turf of the rich. Nowadays, a lot of people own good cellars. They are wine lovers who know where to find the best bargain when it comes to wine cellars.

Also, find out the proper way to choose the shape of the wine glass that increases wine drinking enjoyment, along with the right way to hold a wine glass. It won’t hurt to know why oak barrels are used, and what the markings on the barrels mean.

Discover why wine should be stored in darkness, and the effect of the ultraviolet rays of the sun on the wine. Corks should be stored face down, and you should know what happens when the corks dry out.

Lastly, determine how large the wine cellar should be, and how many wine bottles will fit into the cellars. It is also valuable to know the four steps in tasting wine, similar to way wine experts do it. Find out what to look for in temperature controlled wine cabinet.

The types of wine corks vary with different kinds of wine. Learn more about wine corks withexpert tips from a wine maker in this free video about how to make wine. Expert: John Brack Contact: www.AustinHomebrew.com Bio: John Brack has been brewing his own beer and wine for more than 15 years, and has been on-staff with Homebrew Supply for more than 11 years. Filmmaker: MAKE | MEDIA